Functional Capacity Assessment and Complex Home Modifications Under the NDIS

Home modifications are among the most significant and most practically impactful supports the NDIS can fund. A well-designed accessible bathroom, an appropriate ramp or a ceiling hoist installation can be the difference between a person remaining safely at home and requiring residential care. For complex home modifications — those that involve structural changes, significant costs or specialised design requirements — a comprehensive Functional Capacity Assessment is the clinical foundation on which the entire funding application rests.
This article explains what constitutes a complex home modification under the NDIS, what the OT assessment must establish to support a successful funding application, what types of modifications are commonly funded and what the NDIS does and does not fund in this area.
What are NDIS home modifications?
Home modifications under the NDIS are physical changes to a participant’s home that are required because of their disability and that improve their safety, accessibility and capacity to function in their home environment. Home modifications are funded under the Capital Supports budget. They are distinguished from assistive technology, which covers portable or movable equipment, and from consumables, which covers lower-cost everyday items. Home modifications are structural or semi-structural changes to the physical environment itself.
Under section 34 of the NDIS Act, all NDIS-funded supports must meet the reasonable and necessary criteria. For home modifications, this means the modification must be directly necessary because of the participant’s disability, must improve the participant’s safety or independence in their home, must represent value for money compared to available alternatives and must be appropriate given the participant’s living situation and likely tenure in the property.
Categories of home modification under the NDIS
The NDIS classifies home modifications into three broad categories based on cost and structural complexity. The category determines what assessment is required, how many quotes are needed and how long approval is likely to take.
Category | Description and examples | Typical approval timeline |
Simple (under approximately $1,500) | Non-structural low-cost adaptations: grab rails, lever tap handles, non-slip floor strips, portable ramps, mounted shower seats. Funded under Core Consumables rather than Capital Supports. May not require a formal OT assessment in all cases. | 4 to 6 weeks |
Minor modifications ($1,500 to $20,000) | Non-structural but more substantial changes: accessible bathroom fittings including roll-in shower installation, internal doorway widening without structural wall removal, ceiling hoist systems without structural tracking, ramp construction for smaller height differences. | 4 to 8 weeks |
Complex modifications (over $20,000 or structural) | Structural changes or major renovations: major bathroom rebuilds, structural doorway widening requiring wall modifications, external ramps for significant height differences, ceiling hoist tracking requiring structural installation, platform lifts or stair lifts, kitchen modifications, room additions or extensions. A Building Construction Practitioner is required for complex modifications. A Building Works Project Manager is required for modifications exceeding $30,000. | 8 to 16 weeks or longer |
Why the Functional Capacity Assessment is the foundation of a home modification application
Under the NDIS framework, home modifications cannot be approved without an assessment completed by a qualified home modification assessor, which under NDIS guidelines is an Occupational Therapist with suitable skills, qualifications and experience to assess and recommend home modification supports. This is not optional. Without an OT assessment, a home modification application will not progress.
The OT assessment serves a specific clinical and evidential function. It establishes the causal link between the participant’s disability, their functional limitations in the home environment and the specific modification being recommended. This link is the most critical element of the application. The NDIA must be satisfied that each modification is necessary because of the disability, not simply because it would be convenient or preferred.
What the OT assessment must establish for each modification
What specific functional barrier does the participant’s disability create in the current environment?
What risks does that functional barrier create, including falls risk, injury risk and inability to perform essential daily tasks?
What specific modification is clinically indicated to address that functional barrier?
Why is this modification the most appropriate and cost-effective solution?
What alternatives were considered and why were they not appropriate for this participant?
How does the modification directly support the participant’s goals and NDIS plan outcomes?
A Functional Capacity Assessment that has been completed in the participant’s actual home provides the observational foundation for these answers. An assessment completed in a clinic or based on report without a home visit cannot adequately establish the environmental barriers that exist in the specific home, the safety risks those barriers create in context, the spatial constraints that affect what modifications are feasible or the interaction between the participant’s functional limitations and the specific features of their home environment.
What a home modification OT assessment involves
In-home functional assessment
The Occupational Therapist visits the participant’s home and completes a functional assessment of how the participant performs daily tasks in their actual environment. This includes observing the participant attempting or performing relevant tasks such as entering and exiting the home, transferring into and out of the shower or bath, accessing and using the toilet, moving between rooms and accessing the kitchen. The assessment documents what the participant can and cannot do safely and independently in the current environment and what specific features of the environment create barriers.
Environmental analysis
The assessor measures and documents the current environment in detail, including door widths, bathroom dimensions, floor levels and step heights, shower and bath configurations, hallway widths, threshold heights and any other environmental features relevant to the recommended modifications. For complex modifications, photographs and draft floor plans are prepared to accompany the assessment report.
Clinical justification for each recommendation
For each modification recommended, the assessment report must provide a specific clinical justification that links the participant’s disability, their functional limitations in the current environment, the safety risks identified and the proposed modification. The report must also document what alternatives were considered and why they are not appropriate. For example, if a ceiling hoist is recommended over a portable hoist, the report must explain why the portable option does not adequately address the participant’s functional needs.
Value for money reasoning
The NDIS requires that home modifications represent value for money. The OT assessment must address whether the recommended modification is cost-effective compared to available alternatives, whether lower-cost options would adequately address the functional need and why the recommended approach is the most appropriate solution for this participant. This does not mean the cheapest option is always indicated. It means the recommendation must be clinically justified against the participant’s specific functional needs.
Common complex home modifications and what the FCA must establish for each
Accessible bathroom and wet area modifications
Bathroom modifications are the most frequently funded complex home modification in the NDIS. They commonly include removal of the bath and installation of a roll-in or step-free shower, installation of a fixed or fold-down shower seat, installation of appropriately positioned grab rails and handrails, non-slip flooring, raised toilet installation or toilet surround installation, additional space for wheelchair access or for a carer to assist and removal of barriers such as shower screens that prevent carer access.
For bathroom modifications, the FCA must establish: what personal hygiene tasks the participant cannot perform safely in the current bathroom, what specific features of the current bathroom create the barrier (step into shower, inadequate space for wheelchair, no grab support), what injury or safety risks exist, whether a carer is required to assist with showering or toileting and what space and equipment that requires and why standard assistive technology such as a shower chair or portable grab rail is insufficient for this participant. The design of the accessible shower must account for carer access where relevant, including sufficient floor space for a carer to stand alongside the person and assist, appropriate drainage positioning and the absence of barriers such as shower screens that limit the carer’s ability to support safely.
Ramps and access modifications
Ramp installation is required where the participant uses a wheelchair or mobility aid and cannot safely manage steps or thresholds at the entry to the home or between internal areas. For ramp modifications, the FCA must establish: the participant’s mobility aid or wheelchair specifications, the step or threshold heights requiring ramping, the space available for ramp construction, the gradient required for safe access (typically 1:14 for assisted access and 1:20 for independent access) and the reason why a portable ramp is not sufficient for this participant’s specific requirements.
Doorway widening
Doorway widening is required where the participant’s wheelchair or mobility aid cannot pass through existing doorways. Standard doors are typically 820mm wide, while powered wheelchairs frequently require 900mm or more. For doorway widening, the FCA must establish the participant’s wheelchair or mobility equipment dimensions, which doorways create access barriers, whether the doorway widening requires structural work (removal of load-bearing elements) or is achievable through offset hinges or non-structural modification and the specific rooms or areas the participant cannot access due to the existing doorway widths.
Ceiling hoists and tracking systems
Ceiling hoist systems are funded where a participant requires mechanical assistance for transfers, such as from bed to wheelchair, wheelchair to shower chair or wheelchair to toilet. The FCA must establish the participant’s transfer requirements, the reason why a mobile hoist cannot safely or adequately meet the transfer needs in the home environment, the specific transfer locations and the structural requirements for track installation. Where ceiling hoists are recommended, the assessment must also document the participant’s carer support arrangements and the way in which the hoist system will be operated safely.
Bathroom and toilet design for people with ASD or intellectual disability
For participants with ASD or intellectual disability who present with behaviours of concern including faecal smearing, pica or significant resistance to personal care, the home modification assessment must address the specific environmental design requirements arising from these behaviours. This may include the absence of shower screens or glass enclosures that can be broken or smeared, sufficient floor space for a carer to assist the person with showering and toileting safely and with dignity, appropriate drainage positioning, robust fittings that withstand significant force and surfaces that are easy to clean and maintain. The FCA must document the specific behaviours present, their frequency and severity and the direct implications for the bathroom and toilet design.
What the NDIS does not fund through home modifications
Home modification exclusions under the NDIS
Cosmetic or decorative upgrades beyond the functional requirement, including designer or luxury fittings and materials. Participants may choose to fund upgrades from personal funds with the NDIS contributing the cost of standard-grade functional equivalent.
General home maintenance, repairs or improvements not directly related to the participant’s disability.
Swimming pools, spas or hydrotherapy pools.
Standard hot water systems, air conditioning, ceiling fans or general heating except in rare cases of medically necessary temperature regulation.
Solar panels, home batteries or generators.
Modifications to a rented property without written landlord consent. The NDIA will not approve a modification application for a rental property without documented written consent from the landlord.
Work that has already commenced before NDIS approval has been received. Modifications must not begin until formal NDIS approval is in place.
Important procedural requirements
Do not start work before approval
Modifications must not commence before formal NDIS approval is received. Work completed before approval may not be funded retrospectively, leaving the participant responsible for the full cost.
Rental properties
Where a participant rents their home, written landlord consent is required before the application can be submitted to the NDIA. The application must also address whether the modifications will need to be reversed at the end of the tenancy and how that requirement affects the modification design. Where structural modifications are not feasible or landlord consent cannot be obtained, the assessment should consider alternative approaches including portable or temporary solutions.
Quotes
For minor and complex modifications, quotes from licensed builders are required. For complex modifications, the NDIA generally requires quotes from at least two builders unless circumstances make this impractical. Quotes must specify the scope of work, materials and labour costs in sufficient detail for the NDIA to assess value for money. The NDIS uses the Assistive Technology, Home Modifications and Consumables Code Guide to assess reasonable costs, with pricing benchmarks based on the Modified Monash Model classification of the participant’s location.
Building Works Project Manager
For modifications exceeding $30,000, the NDIS requires a Building Works Project Manager to be engaged to oversee the project. The project manager must be independent of the builder. They ensure the works meet relevant building standards and legal requirements, manage the contractor and certify completion.
The 2026 NDIS context
The Securing the NDIS for Future Generations Bill 2026, introduced to Parliament on 14 May 2026, strengthens the requirement that NDIS supports must have a direct causal connection to the eligible impairment. For home modification applications, this reinforces the importance of a Functional Capacity Assessment that clearly documents the causal relationship between the participant’s disability, the specific functional barriers in their home environment and each modification being recommended. A home modification application without a thorough, in-home OT assessment that establishes this causal chain is unlikely to succeed under the current and forthcoming legislative framework.
Who can refer for a Functional Capacity Assessment that includes home modification assessment?
Referrals are accepted from participants and families, support coordinators, builders and contractors seeking clinical justification for recommended works and legal representatives involved in NDIS appeals. Sina OT has completed Functional Capacity Assessments that have informed home modification recommendations for participants across a range of disability presentations and living situations across Adelaide, Melbourne and Sydney. All assessments are completed in person in the participant’s home environment.
Refer to Sina OT
Sina OT is an independent Occupational Therapy practice providing Functional Capacity Assessments across Adelaide, Melbourne and Sydney.
Sina OT has completed Functional Capacity Assessments for individuals with acquired brain injury across a range of causes and presentations. All assessments are completed in person in the participant’s home and community environment by a registered Occupational Therapist.
Services are available in English and Farsi (Persian).
Related Insight Articles
Functional Capacity Assessment and Assistive Technology Funding Under the NDIS
This article explains what the NDIS funds in assistive technology, what the OT assessment must establish for each major category of equipment, and why the home environment must also be assessed alongside the equipment to ensure the AT can actually be used safely and effectively.
Functional Capacity Assessment for Multiple Sclerosis
Multiple sclerosis (MS) is a chronic autoimmune condition in which the immune system attacks the myelin sheath that protects nerve fibres in the brain and spinal cord. Australia has one of the highest rates of MS in the world, with more than 33,000 Australians living with the condition. MS typically affects people in their most productive years, with diagnosis most common between the ages of 20 and 40. The functional impact of MS is highly variable, both between individuals and within the same individual over time, producing specific challenges for NDIS planning that require comprehensive, condition-specific assessment.
How to Refer a Client for an NDIS FCA
If you or someone you support has been told they need a Functional Capacity Assessment, it is completely normal to feel unsure about what that actually means. This article explains what an NDIS Functional Capacity Assessment is



