Functional Capacity Assessment and Assistive Technology Funding Under the NDIS

Assistive technology is one of the most impactful categories of NDIS funding. The right wheelchair, hoist system, electric bed, shower commode or other equipment can fundamentally change a participant’s daily life, support independence and reduce the physical demands on carers and support workers. For most assistive technology items above the low-cost threshold, a clinical assessment completed by a qualified Occupational Therapist is the evidence foundation on which the funding application rests.
This article explains what the NDIS funds in assistive technology, what the OT assessment must establish for each major category of equipment, and why the home environment must also be assessed alongside the equipment to ensure the AT can actually be used safely and effectively.
What is NDIS assistive technology?
The NDIS defines assistive technology as any equipment, device or system that helps a person with disability do something they cannot do, or cannot do safely, because of their disability. Assistive technology sits within the Capital Supports budget for items over approximately $1,500. Items under $1,500 are funded through Core Supports — Consumables.
To be funded by the NDIS, assistive technology must meet the reasonable and necessary criteria under section 34 of the NDIS Act. The equipment must be directly related to the participant’s disability, represent value for money compared to available alternatives, be the most appropriate solution for the participant’s specific needs and be safe for the participant and their support environment. A clinical recommendation alone is not sufficient. The NDIS requires evidence establishing the direct link between the disability, the functional limitation and the equipment being recommended.
The three cost tiers and what they require
Cost tier | Approximate cost | Evidence required for NDIS funding |
Low cost (Consumables) | Under $1,500 | No formal assessment required. Claimed from Core Consumables budget. Can be purchased without prior NDIA approval. |
Mid cost (Capital AT) | $1,500 to $15,000 | Written advice from an OT or qualified assessor. Quotes not always required. If AT funding is in the plan, participant can purchase with the written advice. |
High cost (Capital AT) | Over $15,000 | Full OT assessment required. Formal quotes required. NDIA must approve before purchase. Trial documentation generally required. |
What every AT assessment must establish
The person: physical, cognitive and sensory capacity as it relates to the equipment being considered.
The task: what specific activities the participant cannot perform, or cannot perform safely and independently, because of their disability.
The environment: where the AT will be used, the physical dimensions and constraints of that environment, and what modifications may be needed to accommodate the AT.
The equipment: why the recommended item is the most appropriate and cost-effective solution, what alternatives were considered and why they are not adequate for this participant.
The trial: for high-cost items, evidence that appropriate options have been trialled and the recommended item has been selected on clinical grounds.
Specific assistive technology items and what the assessment must establish
Manual wheelchairs
A manual wheelchair is indicated where a participant’s disability affects their capacity to walk safely over functional distances or to maintain safe balance and endurance for walking. The OT assessment must establish the reason why walking is not safe or functional for this participant, the participant’s upper limb strength and capacity for self-propulsion, the environments in which the wheelchair will be used and the physical dimensions and terrain of those environments, and the postural and positioning requirements that determine the chair specification.
Manual wheelchair prescriptions range from standard transit chairs to custom-measured rigid or folding frames with specific seating and postural support. A standard off-the-shelf manual wheelchair is a mid-cost item. A custom-measured manual wheelchair with specialist seating is a higher-cost item requiring more detailed clinical justification and trial documentation.
Power wheelchairs
A power wheelchair is indicated where a participant cannot self-propel a manual wheelchair or where the physical effort of manual propulsion creates unacceptable health risks such as shoulder joint damage, fatigue or cardiovascular strain. Power wheelchairs are among the most complex and highest-cost AT items in the NDIS.
The assessment for a power wheelchair must establish: the reason why manual propulsion is not appropriate for this participant, the participant’s motor and cognitive capacity to operate a powered chair safely including the specific drive control system most suited to the participant’s hand and arm function, the dimensions of all environments the chair will be used in including internal doorway widths and turning spaces, outdoor terrain and vehicle access requirements, and the specific seating and postural support system required. A trial of appropriate powered chair options is generally required. Poorly fitted or inadequately trialled power wheelchairs can cause pressure injuries and postural deterioration.
The home environment must be assessed concurrently with the power wheelchair. If doorways are too narrow, if turning space is insufficient or if the floor surface is unsuitable, home modifications will be required alongside the equipment to make it usable. The OT assessment should address both the equipment and the environmental requirements together.
Power add-ons for manual wheelchairs
Power add-on systems, also called power assist systems, are devices attached to a standard manual wheelchair to provide motorised assistance with propulsion. They are indicated for participants who can manage a manual wheelchair for short distances or in certain environments but who experience fatigue, pain or injury risk with sustained self-propulsion over longer distances or on challenging terrain. Power add-ons represent a cost-effective alternative to a full power wheelchair for participants who retain some propulsion capacity. The OT assessment must establish the participant’s residual propulsion capacity, the specific environments and distances that require powered assistance and the reason why a full power wheelchair is not required.
Mobility scooters
A mobility scooter is indicated for participants who can transfer onto the scooter independently and who require powered mobility primarily for community access over distances rather than for home use. The assessment must establish why the participant cannot cover community distances by walking, why a power wheelchair is not indicated for this participant and the specific community environments in which the scooter will be used. Scooters are generally not suitable for indoor home use due to their turning radius. Where a participant needs both home and community mobility equipment, two separate prescriptions may be required.
Electric beds and hospital-grade adjustable beds
An electric adjustable bed is indicated where the participant’s disability creates functional requirements for height adjustment, head or foot elevation or the use of side rails that cannot be met by a standard domestic bed. Clinically relevant reasons include the need for height adjustment to enable safe and independent or assisted transfers in and out of bed, the need for head elevation for respiratory management or to reduce reflux, the need for foot elevation for oedema management or pressure distribution and the need for compatibility with a ceiling hoist tracking system.
The OT assessment must establish the specific functional limitation created by a standard bed for this participant, the transfer requirements and how height adjustment addresses them, any positioning or medical management requirements that require elevation and the clinical reason why a standard bed cannot meet the participant’s needs. The assessment should also address the dimensions of the bedroom and whether the bed can be positioned to allow carer access on both sides where relevant.
Electric recliners with lift function
An electric recliner with a lift function assists participants to rise from seated to standing or to lower from standing to seated. They are indicated where a participant has difficulty rising from and lowering into standard seating due to reduced lower limb strength, joint pain, fatigue or impaired balance and where the effort of standing from standard seating creates a falls risk or requires significant carer assistance.
The NDIS funds clinically indicated specialised seating, not standard domestic recliners. The assessment must clearly establish why the participant’s disability creates a functional requirement for this specific equipment that cannot be met by standard domestic furniture, what features are clinically required including the specific recline angle, lift mechanism specification and seating dimensions, and why the chair is the most cost-effective solution relative to alternatives. Trial of appropriate options is recommended for mid-to-high-cost items.
Ceiling hoists
A ceiling hoist is a mechanical lifting system permanently installed in the ceiling that transfers a person between surfaces such as bed to wheelchair, wheelchair to shower chair or wheelchair to toilet using a sling attachment. Ceiling hoists are indicated where a participant requires full assistance with transfers and where the physical demands of manual handling create an unacceptable injury risk for carers and support workers.
The OT assessment must establish the participant’s transfer requirements and dependency level, the reason why a mobile floor hoist is not adequate in the home environment, the specific transfer locations requiring hoist access, the structural requirements for ceiling track installation and the sling specification appropriate to the participant’s body shape and transfer requirements. The ceiling structure must be assessed by a building practitioner to confirm it can support the load. The AT assessment and the home modification assessment for the track installation must be completed concurrently.
Floor hoists and mobile hoists
A floor hoist is a mobile device on wheels used to transfer a person who requires full assistance with transfers. It is indicated where a participant requires full transfer assistance and where ceiling hoist installation is not feasible, such as in rental properties or where the ceiling structure cannot support a fixed installation. The OT assessment must establish the transfer requirements, the reason why a floor hoist rather than a ceiling hoist is recommended in this situation and the specific floor hoist model and sling type appropriate for the participant.
A critical environmental consideration for floor hoists is the available floor space at each transfer location. A floor hoist requires clear floor space to manoeuvre. The assessment must address whether the current bedroom, bathroom and toilet environments provide sufficient space for the floor hoist to be used safely, and whether any furniture repositioning or environmental modification is required.
Stand lifters and sit-to-stand hoists
A stand lifter or sit-to-stand hoist assists participants who retain partial weight-bearing capacity to move between sitting and standing positions. They are indicated where the participant can bear some weight through their legs but cannot safely rise from or lower into sitting without mechanical assistance, and where a full ceiling or floor hoist providing complete lift would be more than is clinically required. The OT assessment must carefully establish the participant’s residual weight-bearing capacity, lower limb strength, balance and cognitive capacity to participate actively in the transfer, as a stand lifter is not appropriate for participants with no useful weight-bearing capacity.
Stairlifts and platform lifts
A stairlift is a motorised rail system that carries a seated person up and down a staircase. A platform lift is a small, enclosed lift that raises and lowers a person in a wheelchair between floor levels. Both are indicated where the participant’s disability prevents them from using stairs and where the home design requires access to multiple levels. The OT assessment must establish the participant’s inability to manage stairs safely, the specific access requirements between levels, the staircase dimensions and configuration relevant to the stairlift specification and whether a stairlift or platform lift is more appropriate for this participant. These are typically high-cost items requiring NDIA approval and may also require a building practitioner’s assessment of the staircase structure.
Mobile shower commodes
A mobile shower commode is a wheeled chair designed to be used over the toilet and in the shower simultaneously, eliminating the need for the person to transfer between a toilet and a shower chair. They are indicated for participants who require full assistance with toileting and showering and where two separate transfers would create unacceptable fatigue or injury risk for the participant or the carer.
The OT assessment must establish the transfer dependency level, why a mobile shower commode is more appropriate than separate toilet and shower chairs for this participant, and whether the bathroom and toilet dimensions allow the commode to be wheeled in over the toilet and into the shower area. This last point is critical: if the doorway between the toilet and shower areas is too narrow or if there is a step, the commode cannot be used effectively without a concurrent home modification. The AT and home modification assessments must address this together.
Shower trolleys
A shower trolley is a padded, waterproof mobile stretcher on which a person is showered in a lying position. It is indicated for participants who cannot be positioned safely in a seated shower position due to high postural support needs, spasticity, contracture or significant behavioural presentation that makes seated showering unsafe. The OT assessment must establish the clinical reason why seated showering is not appropriate for this participant, the level of assistance required and the spatial requirements of the shower area to accommodate the trolley and the carer or carers assisting. Shower trolley use typically requires a roll-in shower with no step and sufficient floor area, which may require a concurrent home modification.
Bidets
A bidet or bidet toilet seat is indicated for participants who cannot perform independent or assisted perineal hygiene after toileting due to limited upper limb function, significant pain with movement or other disability-related barriers. A bidet reduces the physical demands of personal hygiene management for both the participant and any carer involved. The OT assessment must establish the specific functional barrier to standard hygiene management for this participant, the clinical indication for the bidet and the reason why standard alternatives are not adequate. A bidet toilet seat is typically a mid-cost item. A freestanding bidet installation may require a concurrent home modification assessment.
Why the environment must be assessed alongside the equipment
One of the most common and most preventable causes of assistive technology funding being wasted is the prescription of equipment that cannot actually be used in the participant’s home because the environment has not been assessed concurrently. The OT assessment must evaluate the participant’s home environment alongside the equipment to identify any barriers to safe and effective use.
Common environmental barriers that affect AT usability include the following.
- Door widths: most power wheelchairs require a minimum clear doorway width of 900mm. Standard doors are typically 820mm. If doorways are too narrow for the prescribed chair, the chair cannot be used to access all areas of the home without concurrent doorway widening.
- Turning space: power wheelchairs and mobile hoists require sufficient floor space to manoeuvre. Small bedrooms and bathrooms may not have adequate turning space. This must be assessed against the specific dimensions of the prescribed equipment.
- Floor surfaces: some floor surfaces are not suitable for wheeled equipment. High-pile carpet significantly increases the effort required to propel a manual wheelchair and can obstruct floor hoist and shower commode wheels.
- Step and threshold heights: thresholds between rooms, at external doors and at shower entries can prevent safe use of wheeled AT unless they are addressed through home modifications.
- Bathroom layout: shower commodes, shower trolleys and floor hoists all require specific minimum bathroom dimensions and configurations. A shower commode that cannot be wheeled over the toilet, or a shower trolley that cannot fit through the shower entry, cannot be used effectively regardless of how appropriate the equipment is for the participant.
- Bedroom access: a ceiling hoist track must be positioned to access all required transfer locations. The bedroom layout must be assessed against the hoist track design to ensure all transfers are achievable.
Where the environment requires modification to allow safe AT use, the home modification and AT assessments should be completed together and the recommendations should be coordinated. Funding for the home modification and the AT may both be required in the same NDIS plan for the participant to be able to use the equipment safely.
The 2026 NDIS context
The Securing the NDIS for Future Generations Bill 2026, introduced to Parliament on 14 May 2026, strengthens the requirement that NDIS supports must have a direct causal connection to the eligible impairment. For assistive technology, this reinforces the importance of a Functional Capacity Assessment that clearly documents the specific functional limitation caused by the disability and the direct relationship between that limitation and each piece of equipment being recommended. Additionally, from mid-2026, the I-CAN v6 functional assessment tool is expected to be incorporated into the new framework planning process. Participants approaching a plan review that includes AT should ensure their functional evidence is current.
Who can refer for a Functional Capacity Assessment that includes AT assessment?
Referrals are accepted from participants and families, support coordinators, AT suppliers seeking clinical justification and legal representatives involved in NDIS appeals. Sina OT has completed Functional Capacity Assessments that have informed assistive technology recommendations for participants across a range of disability presentations across Adelaide, Melbourne and Sydney. All assessments are completed in person in the participant’s home and community environment.
Refer to Sina OT
Sina OT is an independent Occupational Therapy practice providing Functional Capacity Assessments across Adelaide, Melbourne and Sydney.
Sina OT has completed Functional Capacity Assessments for individuals with acquired brain injury across a range of causes and presentations. All assessments are completed in person in the participant’s home and community environment by a registered Occupational Therapist.
Services are available in English and Farsi (Persian).
Related Insight Articles
Functional Capacity Assessment for Stroke
Stroke is one of the leading causes of disability in Australia. Each year approximately 56,000 Australians have a stroke and more than 430,000 Australians live with the long-term effects of stroke. For people who are under 65 at the time of their stroke, the NDIS is the primary pathway to accessing disability support funding. The functional consequences of stroke are wide-ranging, highly individual and extend far beyond the physical impairments that are most visible to others. A Functional Capacity Assessment is the cornerstone of NDIS access and planning for stroke survivors.
Functional Capacity Assessment for Multiple Sclerosis
Multiple sclerosis (MS) is a chronic autoimmune condition in which the immune system attacks the myelin sheath that protects nerve fibres in the brain and spinal cord. Australia has one of the highest rates of MS in the world, with more than 33,000 Australians living with the condition. MS typically affects people in their most productive years, with diagnosis most common between the ages of 20 and 40. The functional impact of MS is highly variable, both between individuals and within the same individual over time, producing specific challenges for NDIS planning that require comprehensive, condition-specific assessment.
Functional Capacity Assessment for Autism Spectrum Disorder
Autism Spectrum Disorder (ASD) affects an estimated one in 40 Australians. It is one of the most common presentations in the NDIS and one of the most complex to assess for funding purposes. The Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) classifies ASD into three severity levels, each describing a different level of support required. Understanding what these levels mean clinically, how they interact with NDIS eligibility and what a Functional Capacity Assessment provides at each level is essential knowledge for anyone navigating the NDIS with an ASD diagnosis.



